FAQ's

Why should I convert to an alternate fuel?

You should convert your vehicle to operate on an alternate fuel for three main reasons. The first reason is economic as alternate fuels throughout the world are traditionally less expensive than gasoline (petrol). The second reason is environmental as alternate fuels are capable of providing fewer harmful emissions than gasoline. Finally,
the conversion of vehicles to operate on an alternate fuel in countries where there is local abundance of that fuel, allows for a reduction of imported gasoline. However, there must be a fueling infrastructure available to convert vehicles so you can refuel the vehicle.

Are natural gas and propane the same fuel?

No, natural gas and propane are two different fuels. Natural gas is a high-pressure gaseous fuel that always stays as a gas. Natural gas is lighter than air so if it leaks, it escapes into the atmosphere. Propane on the other hand is a low-pressure fuel and is stored as a liquid. The propane emits a vapour and it is the vapour that the vehicles operate on. Propane is heavier than air so if it leaks, it puddles much like gasoline does. Propane, being a liquid has a higher density, therefore provides greater vehicle range than natural gas given the same volume of fuel storage. Propane storage tanks and natural gas storage tanks are not interchangeable as one is high pressure and the other is low-pressure system. Natural gas is compressed to a high pressure much like a scuba divers air tank so requires a high-pressure compressor to fill the tank.

Are all conversion systems the same?

No, all conversion systems are definitely not the same. There are various levels of technology in vehicle conversion systems as well as different levels of the actual components. There is also a major difference in the quality of manufacturing as well as safety standards that the conversion kits are made to. Different countries manufacture their systems to different safety codes and standards so the selection of the conversion system should be carried out with great care. When you are purchasing a conversion system do not think that all kits are equal and merely opt for the cheaper kit. Cheap, basic conversion kits are lower priced because they contain fewer components to reduce the price and are manufactured to a lower standard. A cheap, basic conversion kit will not allow the vehicle to run properly or provide good fuel economy or clean emissions.

Why would I choose to convert my vehicle to operate on Propane (LPG)

Propane is the fuel of choice when greater vehicle range is required. Propane is stored as a liquid so has greater density than natural gas thus providing more range. Propane can usually deliver similar vehicle range as gasoline. Propane is a low-pressure fuel so the conversion cost is usually less than natural gas as the cost of the fuel tank is less expensive. Typically in North America, a propane-converted vehicle will save approximately 40% fuel costs. This value will change in various markets but propane is typically more economical than gasoline.

Why would I choose to convert my vehicle to operate on Natural Gas (CNG)

Natural Gas is the fuel of choice when vehicle range is not an important issue and when natural gas is in abundant supply. Natural gas converted vehicles will typically deliver about a quarter of the vehicle range of gasoline. Natural gas is popular in countries with abundant natural gas resources and no oil resources. The use of natural gas in these cases reduces the need for oil imports and therefore reduces the countries foreign exchange. Natural gas will provide economical vehicle operation and reduced vehicle emissions.

Will Yugo-Tech work with my company to develop a conversion system that is right for our vehicles?

Definitely yes, Yugo-Tech routinely assists companies and cities etc. in various markets throughout the world to select the appropriate conversion technology to suit their particular requirements. Yugo-Tech assists parties in viability studies to analyze and recommend the appropriate technology that will satisfy the technical requirements of the vehicles that will be affordable to fit into their local market economy. Yugo-Tech will manufacture the conversion systems to satisfy the host customer’s safety and emission standards. Yugo-Tech will assist in technology transfers for foreign markets on large conversion programs to allow for local content.